Réactifs et instruments pour l'immunologie, la biologie cellulaire et la biologie moléculaire.
 
> 1-Naphthaleneacetic acid [86-87-3]

1-Naphthaleneacetic acid [86-87-3]

Imprimer Imprimer
Identifiez-vous
Commande minimum 2

Référence HY-18570-5g

Conditionnement : 5g

Marque : MedChemExpress

Demander plus d'informations

Contactez votre distributeur local :


Téléphone : +1 850 650 7790

Description

1-Naphthaleneacetic acid (1-Naphthylacetic acid), a auxin, can promote plant growth. 1-Naphthaleneacetic acid is also an inhibitor of PLA2, with an IC50 of 13.16 μM[1][2].

IC50 & Target[1]

PLA2

13.16 μM (IC50)

In Vitro

1-Naphthaleneacetic acid (0.7-14 μM) inhibits the activity of PLA2, with the Ki and IC50 of 6.87 μM and 13.16 μM, respectively[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

1-Naphthaleneacetic acid Related Antibodies

Solvant et solubilité
In Vitro: 

Methanol : 125 mg/mL (671.29 mM; Need ultrasonic)

DMSO : ≥ 100 mg/mL (537.03 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

H2O : < 0.1 mg/mL (insoluble)

*"≥" means soluble, but saturation unknown.

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 5.3703 mL 26.8514 mL 53.7028 mL
5 mM 1.0741 mL 5.3703 mL 10.7406 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (13.43 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (13.43 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Pureté et documentation
Références

Vous serez peut-être également intéressé par les produits suivants :



Référence
Description
Cond.
Prix HT
238967-1Kg
Indole-3-acetic Acid
 1Kg 
HY-N0160-5g
Kinetin [525-79-1]
 5g