Solvant et solubilité |
In Vitro:
DMSO : ≥ 28 mg/mL (60.68 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
*"≥" means soluble, but saturation unknown.
Preparing Stock Solutions
Concentration
Solvent
Mass
|
1 mg |
5 mg |
10 mg |
1 mM
|
2.1670 mL
|
10.8349 mL
|
21.6699 mL
|
5 mM
|
0.4334 mL
|
2.1670 mL
|
4.3340 mL
|
10 mM
|
0.2167 mL
|
1.0835 mL
|
2.1670 mL
|
View the Complete Stock Solution Preparation Table
*
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles. Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Calculateur de molarité
Calculateur de dilution
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
-
Protocol 1
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline Solubility: 2.5 mg/mL (5.42 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection. Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL. Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
-
Protocol 2
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline) Solubility: 2.5 mg/mL (5.42 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection. Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly. Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
-
Protocol 3
Add each solvent one by one: 10% DMSO 90% Corn Oil Solubility: 2.5 mg/mL (5.42 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection. Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.
For the following dissolution methods, please prepare the working solution directly.
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution.
If precipitation or phase separation occurs during preparation,
heat and/or sonication can be used to aid dissolution.
-
Protocol 1
Add each solvent one by one: 50% PEG300 50% Saline Solubility: 10 mg/mL (21.67 mM); Suspended solution; Need ultrasonic
-
Protocol 2
Add each solvent one by one: 20% SBE-β-CD in Saline Solubility: 6.67 mg/mL (14.45 mM); Suspended solution; Need ultrasonic
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
Please enter your animal formula composition:
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO,
. All of co-solvents are available by MedChemExpress (MCE).
, Tween 80. All of co-solvents are available by MedChemExpress (MCE).
|