Reagenzien und Instrumente für die Immunologie Zellbiologie und Molekularbiologie
 
> Ki16425 [355025-24-0]

Ki16425 [355025-24-0]

Drucken Drucken
Melden Sie sich an

Katalog-Nummer HY-13285-5mg

Size : 5mg

Marke : MedChemExpress

Weitere Informationen anfordern

Contact local distributor :


Telefonnummer : +1 850 650 7790

Beschreibung

Ki16425 (Debio 0719) is a subtype-selective, competitive antagonist of the EDG-family receptors, LPA1 and LPA3 with Kis of 0.34 μM and 0.93 μM, respectively. Ki16425 (Debio 0719) reduces the LPA-induced activation of p42/p44 MAPK[1][2]. Ki16425 can also inhibit LPA-induced dephosphorylation of Yes-associated protein (YAP)/TAZ in HEK293A cells[3].

IC50 & Target

Ki: 0.34 μM (LPA1), 0.93 μM (LPA3), 6.5 μM (LPA2)[1]
In Vitro

Ki16425 (10 μM; 1.5 hours; HEK293A cells) treatment blocks LPA-induced dephosphorylation of YAP/TAZ in HEK293A cells. Ki16425 partially inhibits the ability of serum to repress YAP/TAZ phosphorylation, particularly at low serum concentrations (0.2%)[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Ki16425 Related Antibodies

Western Blot Analysis[3]

Cell Line: HEK293A cells
Concentration: 10 μM
Incubation Time: 1.5 hours
Result: Blocked LPA-induced dephosphorylation of YAP/TAZ. Partially inhibited the ability of serum to repress YAP/TAZ phosphorylation.
In Vivo

Ki16425 (Debio 0719) (1-30 mg/kg; i.p.; at 30 min prior to LPA injection) inhibits LPA-induced neuropathic pain-like behaviors[4].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: 20-24 g male standard ddY-strain mice[4]
Dosage: 1-30 mg/kg
Administration: Intraperitoneal injection; at 30 minutes prior to LPA injection
Result: LPA-induced neuropathic pain behaviors were attenuated in a dose-dependent manner.
Molekulargewicht

474.96

Formel

C23H23ClN2O5S
CAS. Nr.
Appearance

Solid

Color

White to off-white

SMILES

ClC1=C(C=CC=C1)C(C)OC(NC2=C(ON=C2C)C3=CC=C(C=C3)CSCCC(O)=O)=O
Versand

Room temperature in continental US; may vary elsewhere.
Speicherung
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
Lösungsmittel & Löslichkeit
In Vitro: 

DMSO : ≥ 100 mg/mL (210.54 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

*"≥" means soluble, but saturation unknown.

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.1054 mL 10.5272 mL 21.0544 mL
5 mM 0.4211 mL 2.1054 mL 4.2109 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (5.26 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (5.26 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Reinheit & Dokumentation
Verweise

Sie könnten auch an folgenden Produkten interessiert sein:



Katalog-Nummer
Beschreibung
Cond.
Preis zzgl. MwSt.
0102-09
Mouse IgG1-PE
 100tests