Mix-n-Stain™ Maxi CF®647 Antibody Labeling Kit, 1x1mg labeling
Referência 92410
Tamanho : 1kit
Marca : Biotium
Contactar o distribuidor local :
Telefone : +1 850 650 7790
Mix-n-Stain™ Maxi Antibody Labeling Kits, 1 mg Labeling
The simplicity and convenience of Mix-n-Stain™ labeling, for conjugation of 1 mg IgG with our CF® Dyes or other dyes.
Technology
CF® Dyes
Antibody & Protein Labeling Kits
Supporting Documents
Product Description
Mix-n-Stain™ Maxi Antibody Labeling Kits allow you to rapidly label 1 mg of IgG with one of our next-generation CF® Dyes or other label.
- Rapid, simple, covalent antibody conjugation
- No purification required after labeling
- Reaction takes only 30 minutes, with minimal hands-on time
- Wide selection of our next-gen CF® Dyes and other dyes
- One labeling reaction of 1 mg IgG per kit
Kit Components
- Reaction Buffer
- Lyophilized Reactive Dye
- Quenching Buffer
Unrivaled Convenience
Mix-n-Stain™ Maxi Antibody Labeling Kits allow you to rapidly label 1 mg of IgG with one of our next-generation CF® Dyes or other label. Simply mix your antibody with the reaction buffer and optimally formulated dye provided, followed by a 30 minute incubation and addition of the provided stop buffer. Any remaining free dye or other label is no longer reactive at the end of the labeling, so the conjugate is ready for staining without further purification. Note the labeling protocol and buffer requirements for the Maxi kits differ from our original micro-scale Mix-n-Stain™ kits, see the Reaction Compatibility Chart below.
After the reaction, the antibody will be labeled with an average of 4-6 dye molecules per antibody molecule. Mix-n-Stain™ labeling is covalent, so labeled antibodies can be used for multiplex staining without transfer of dyes/labels between antibodies.
Superior CF® Dyes
These kits feature a choice of Biotium’s next-generation CF® Dyes, which were designed for advantages in brightness and photostability compared to Alexa Fluor®, DyLight®, and other fluorescent dyes. Learn more about CF® Dyes. We also offer kits for labeling with Cyanine 555, Cyanine 647, or fluorescein/FITC. See Ordering Information below.
Choose the Right Kit for Your Application
These kits are optimized for a single labeling reaction with 1 mg of IgG. Mix-n-Stain™ kits are not designed to be used for multiple labeling reactions. For smaller-scale conjugation, see our original Mix‑n‑Stain™ CF® Dye Antibody Labeling Kits; original Mix-n-Stain™ kits also have greater tolerance for antibody buffer additives, and provide special protocols for labeling antibodies in buffer with BSA or in ascites fluid. The kits are not recommended for labeling IgM antibodies, which may denature under the reaction conditions.
Mix-n-Stain™ kits can be used to label other proteins, however, the degree of labeling (DOL, or number of dye molecules per antibody) may not be optimal, and the kits are not designed to allow for DOL measurement after labeling. For performing reactions to optimize DOL for your antibody or application, we recommend using our CF® Dye SE Protein Labeling Kits. The kits include everything you need to perform controlled conjugation reactions and post-labeling purification, as well as detailed instructions and correction factors for determining DOL for CF® Dyes.
Learn about all of our Mix-n-Stain™ and protein labeling options, or see our Frequently Asked Questions (FAQs) for more information.
Reaction Compatibility for Mix-n-Stain™ Maxi Antibody Labeling Kits, 1 mg Labeling
| Component | Compatibility |
|---|---|
| Sodium azide | Compatible |
| Glycerol ≤ 10%: | Compatible |
| Glycerol > 10%: | Compatible after ultrafiltration* |
| Tris ≤20 mM | Compatible |
| Tris >20 mM | Compatible after ultrafiltration* |
| Glycine | Compatible after ultrafiltration* |
| BSA or gelatin | Not compatible; purify antibody** |
| Serum, cell culture supernatant, or ascites fluid | Not compatible; purify antibody** |
** Protocol/reagents for antibody purification not provided.
Mix-n-Stain™ Maxi Ordering Information
| Conjugation | Ex/Em | Labeling size | Catalog No. | Dye Features |
|---|---|---|---|---|
| CF®350 | 347/448 nm | 1 mg | 92420 | CF®350 Features |
| CF®405S | 404/431 nm | 1 mg | 92421 | CF®405S Features |
| CF®405M | 408/452 nm | 1 mg | 92404 | CF®405M Features |
| CF®405L | 395/545 nm | 1 mg | 92454 | CF®405L Features |
| CF®488A | 490/515 nm | 1 mg | 92405 | CF®488A Features |
| CF®555 | 555/565 nm | 1 mg | 92406 | CF®555 Features |
| CF®568 | 562/583 nm | 1 mg | 92407 | CF®568 Features |
| CF®594 | 593/614 nm | 1 mg | 92408 | CF®594 Features |
| CF®633 | 630/650 nm | 1 mg | 92409 | CF®633 Features |
| CF®647 | 650/665 nm | 1 mg | 92410 | CF®647 Features |
| CF®680 | 681/698 nm | 1 mg | 92422 | CF®680 Features |
| CF®750 | 755/777 nm | 1 mg | 92423 | CF®750 Features |
| CF®770 | 770/797 nm | 1 mg | 92424 | CF®770 Features |
| Fluorescein (FITC) | 494/518 nm | 1 mg | 92411 | |
| Cyanine 555 | 555/565 nm | 1 mg | 92415 | |
| Cyanine 647 | 650/665 nm | 1 mg | 92419 |
Antibody & Protein Labeling Kits
| Product Name | Label Options | Labeling Scale | Labeling Time | Features |
|---|---|---|---|---|
| Mix-n-Stain™ CF® Dye Antibody Labeling Kits | CF® Dyes | ≤5-20 ug IgG 20-50 ug IgG 50-100 ug IgG | ~ 15 min. | • Rapid, simple labeling • No purification • Tolerates BSA & other additives • Dyes for super-resolution, spectral flow, & NIR detection |
| Mix-n-Stain™ FITC Antibody Labeling Kits | FITC | |||
| Mix-n-Stain™ Cyanine Dye Antibody Labeling Kits | Cyanine 555 Cyanine 647 | |||
| Mix-n-Stain™ Biotin Antibody Labeling Kits | Biotin | |||
| Mix-n-Stain™ Digoxigenin Antibody Labeling Kits | Digoxygenin (DIG) | |||
| Mix-n-Stain™ DNP Antibody Labeling Kits | DNP | |||
| Mix-n-Stain™ Maxi Antibody Labeling Kits | CF® Dyes Cyanine Dyes | 1 mg IgG | ~ 30 min. | |
| Mix-n-Stain™ CF® Dye IgM Antibody Labeling Kits | CF® Dyes FITC | 25 ug IgM 100 ug IgM | 15-30 min. | • Rapid, simple labeling • No purification |
| Mix-n-Stain™ STORM CF® Dye Antibody Labeling Kits | CF® Dyes | 50 ug IgG | ~ 30 min. | • Optimized to provide low 1-2.5 DOL • No purification |
| Mix-n-Stain™ Nanobody Labeling Kits | CF® Dyes | 5-20 ug Nanobody® 20-50 ug Nanobody® | ~ 30 min. | • Optimized for Nanobodies® • Tolerates BSA & other additives |
| Mix-n-Stain™ Small Ligand Labeling Kits | CF® Dyes | 0.1 umol small ligand | ~ 30 min. | • Label SNAP®, CLIP™, HaloTag® & other small ligands • Dye options for surface or intracellular targets |
| VivoBrite™ Rapid Antibody Labeling Kits for Small Animal In Vivo Imaging | Near-IR CF® Dyes | 3 x 1 mg IgG | ~ 2 hours | • Dyes, buffers, & spin vials for labeling + purification • Sterile syringes, filters and storage vials for in vivo use |
| CF® Dye & Biotin SE Protein Labeling Kits | CF® Dyes Biotin | 3 x 1 mg protein | ~ 2 hours | • Dyes, buffers, & spin vials for labeling + purification |
Alexa Fluor and DyLight are registered trademarks of Thermo Fisher Scientific; SNAP-tag and CLIP-tag are trademarks or registered trademarks of New England BioLabs; HaloTag is a registered trademark of Promega Corporation.
References
Download a list of curated CF® Dye references.
Você também pode estar interessado nos seguintes produtos:
Referência
Descrição
Cond.
Price Bef. VAT