Sulfosuccinimidyl oleate (sodium) [1212012-37-7]

Referência HY-112847A-10mg

Tamanho : 10mg

Marca : MedChemExpress

Solicitar mais informações

Contactar o distribuidor local :


Telefone : +1 850 650 7790

Sulfosuccinimidyl oleate sodium (Sulfo-N-succinimidyl oleate sodium) is a long chain fatty acid that inhibits fatty acid transport into cells. Sulfosuccinimidyl oleate sodium is a potent and irreversible inhibitor of mitochondrial respiratory chain. Sulfosuccinimidyl oleate sodium binds the CD36 receptor on the surface of microglia. Anti-inflammatory effect.

Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.

Sulfosuccinimidyl oleate sodium Chemical Structure

Sulfosuccinimidyl oleate sodium Chemical Structure

This product is a controlled substance and not for sale in your territory.

Based on 21 publication(s) in Google Scholar

Other Forms of Sulfosuccinimidyl oleate sodium:

  • (E/Z)-Sulfosuccinimidyl oleate sodium Obtenir un devis
  • Sulfosuccinimidyl oleate Obtenir un devis
Description

Sulfosuccinimidyl oleate sodium (Sulfo-N-succinimidyl oleate sodium) is a long chain fatty acid that inhibits fatty acid transport into cells. Sulfosuccinimidyl oleate sodium is a potent and irreversible inhibitor of mitochondrial respiratory chain. Sulfosuccinimidyl oleate sodium binds the CD36 receptor on the surface of microglia. Anti-inflammatory effect[1][2].

In Vitro

Sulfosuccinimidyl oleate (20 μM and 50 μM, 24 hours) alone does not alter the cellular viability. Exposure to 100 ng/ml LPS+5 ng/mL IFNγ modestly, yet significantly reduces the viability of the BV2 cells. Co-treatment with Sulfosuccinimidyl oleate prevents the LPS+IFNγ-induced reduction in the cell viability[1].
Sulfosuccinimidyl oleate (50 μM, 24 hours) co-treatment significantly reduces the LPS+IFNγ-induced expression of NOS2 and COX-2 in BV2 cells. Western blot analysis reveals a significant LPS/IFNγ-induced upregulation in the phosphorylated form of the p38, which is prevented by co-treatment with Sulfosuccinimidyl oleate (50 μM, 24 hours)[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Cell Viability Assay[1]

Cell Line: BV2 cells
Concentration: 20 μM and 50 μM
Incubation Time: 24 hours
Result: Did not alter the viability of BV2 cells alone. Exposure of BV2 cells to 100 ng/mL LPS and 5 ng/mL IFNγ significantly reduced the viability of BV2 cells while simultaneous treatment with Sulfosuccinimidyl oleate prevented it.

Western Blot Analysis[1]

Cell Line: BV2 cells
Concentration: 50 μM
Incubation Time: 24 hours
Result: Drastically increased the levels of NOS2, COX-2, and P-p38/T-p38.
In Vivo

the Sulfosuccinimidyl oleate (50 mg/kg; administered once by single oral gavage) significantly reduces the cortical ischemic infarct size compared to vehicle-treated controls in male BALB/cABom mice with pMCAo model. In addition, Sulfosuccinimidyl oleate at 50 mg/kg is suitable to see a beneficial effect after stroke[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: 4-month-old male BALB/cABom mice with pMCAo model[1]
Dosage: 50 mg/kg
Administration: Administered once by single oral gavage
Result: Reduced brain damage following ischemia. Attenuated infarct size.
Masse moléculaire

481.58

Formule

C22H36NNaO7S

Appearance

Solid

Color

White to off-white

SMILES

O=S(C(C1)C(N(OC(CCCCCCC/C=C\CCCCCCCC)=O)C1=O)=O)(O[Na])=O

Livraison

Room temperature in continental US; may vary elsewhere.

Stockage

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

Solvant et solubilité
In Vitro: 

DMSO : 62.5 mg/mL (129.78 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.0765 mL 10.3825 mL 20.7650 mL
5 mM 0.4153 mL 2.0765 mL 4.1530 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Calculateur de molarité

  • Calculateur de dilution

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (4.32 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (4.32 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  50% PEG300    50% Saline

    Solubility: 3.33 mg/mL (6.91 mM); Suspended solution; Need ultrasonic

  • Protocol 2

    Add each solvent one by one:  0.5% Methylcellulose/saline water

    Solubility: 3.33 mg/mL (6.91 mM); Suspended solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation

Purity: ≥98.0%

Références
  • [1]. Dhungana H, et al. Sulfosuccinimidyl oleate sodium is neuroprotective and alleviates stroke-induced neuroinflammation. J Neuroinflammation. 2017 Dec 4;14(1):237.  [Content Brief]

    [2]. Drahota Z, et al. Succinimidyl oleate, established inhibitor of CD36/FAT translocase inhibits complex III of mitochondrial respiratory chain. Biochem Biophys Res Commun. 2010 Jan 15;391(3):1348-51.  [Content Brief]

  • [1]. Dhungana H, et al. Sulfosuccinimidyl oleate sodium is neuroprotective and alleviates stroke-induced neuroinflammation. J Neuroinflammation. 2017 Dec 4;14(1):237.

    [2]. Drahota Z, et al. Succinimidyl oleate, established inhibitor of CD36/FAT translocase inhibits complex III of mitochondrial respiratory chain. Biochem Biophys Res Commun. 2010 Jan 15;391(3):1348-51.

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.0765 mL 10.3825 mL 20.7650 mL 51.9125 mL
5 mM 0.4153 mL 2.0765 mL 4.1530 mL 10.3825 mL
10 mM 0.2076 mL 1.0382 mL 2.0765 mL 5.1912 mL
15 mM 0.1384 mL 0.6922 mL 1.3843 mL 3.4608 mL
20 mM 0.1038 mL 0.5191 mL 1.0382 mL 2.5956 mL
25 mM 0.0831 mL 0.4153 mL 0.8306 mL 2.0765 mL
30 mM 0.0692 mL 0.3461 mL 0.6922 mL 1.7304 mL
40 mM 0.0519 mL 0.2596 mL 0.5191 mL 1.2978 mL
50 mM 0.0415 mL 0.2076 mL 0.4153 mL 1.0382 mL
60 mM 0.0346 mL 0.1730 mL 0.3461 mL 0.8652 mL
80 mM 0.0260 mL 0.1298 mL 0.2596 mL 0.6489 mL
100 mM 0.0208 mL 0.1038 mL 0.2076 mL 0.5191 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

Sulfosuccinimidyl oleate sodium Related Classifications

  • Autophagy
  • Mitophagy
Help & FAQs

Keywords:

Sulfosuccinimidyl oleateSulfo-N-succinimidyl oleateMitophagyMitochondrial AutophagyInhibitorinhibitorinhibit

Você também pode estar interessado nos seguintes produtos:



Referência
Descrição
Cond.
Price Bef. VAT
abx283015-5mg
 5mg 
HY-B0256-1g
 1g 
T22027-10mg
 10mg